About breath belt adjustment
We accept the breath adjustment of the watch you purchased before shipping.
If you wish, please measure the specified breath size or actual size around the wrist and let us know.
I will adjust it with a little extra time.
If you wish, please measure the specified breath size or actual size around the wrist and let us know.
I will adjust it with a little extra time.
* We cannot accept returns after size adjustment.Please understand beforehand.
* If you need to add a piece, we will ask for a response from the manufacturer.
* The removed pieces will be sent together with the clock.
* We accept re-adjustment, but we ask you to pay for shipping.
* If you need to add a piece, we will ask for a response from the manufacturer.
* The removed pieces will be sent together with the clock.
* We accept re-adjustment, but we ask you to pay for shipping.
STEP1 Prepare paper

Cut the paper into a strip to measure around your wrist.
STEP2 Wrap around your wrist

Wrap a paper band made in STEP1 around your wrist.
At this time, please wind it with some margin.
Use a pen to mark where you have gone around.
The winding position is the position when wearing the watch, a little better position than the ankle.
At this time, please wind it with some margin.
Use a pen to mark where you have gone around.
The winding position is the position when wearing the watch, a little better position than the ankle.
STEP3

Measure the length from the end to the point marked with your ruler. This length is the size around the wrist. If adjustment is required, enter the actual size when ordering.I will adjust it with a little extra time.
Adjusting the ring size
For the original Yukizaki jewelry you have purchased, we can adjust the ring for free before shipping.
If you wish, please measure the specified ring size or actual size around your finger and enter it after referring to the number in the table below.
We will adjust it.
If you wish, please measure the specified ring size or actual size around your finger and enter it after referring to the number in the table below.
We will adjust it.
* We cannot accept returns after size adjustment.Please understand beforehand.
* Adjustment may not be possible depending on the ring design.
* In the case of adjustment, the ring may be distorted.Please understand beforehand.
* Adjustment may not be possible depending on the ring design.
* In the case of adjustment, the ring may be distorted.Please understand beforehand.
STEP1 Prepare paper

Cut the paper into a strip to measure around your finger.
STEP2 Wrap it around your finger

Wrap the paper band created in STEP1 around the finger you want to attach the ring to.
Use a pen to mark where you have gone around.
Use a pen to mark where you have gone around.
STEP3

Measure the length from the end to the point marked with your ruler. This length is the size around the finger.
STEP4
Refer to the table below for the inside diameter and finger circumference, and confirm the number.
When ordering, please enter the number.
When ordering, please enter the number.
number | Ring inner diameter (mm) | Around the finger |
---|---|---|
No. 1 | 13.0mm | 40.8mm |
No. 2 | 13.4mm | 41.9mm |
No. 3 | 13.7mm | 42.9mm |
No. 4 | 14.0mm | 44.0mm |
No. 5 | 14.4mm | 45.0mm |
No. 6 | 14.7mm | 46.1mm |
No. 7 | 15.0mm | 47.1mm |
No. 8 | 15.4mm | 48.2mm |
No. 9 | 15.7mm | 49.2mm |
No. 10 | 16.0mm | 50.3mm |
No. 11 | 16.4mm | 51.3mm |
No. 12 | 16.7mm | 52.4mm |
No. 13 | 17.0mm | 53.4mm |
No. 14 | 17.4mm | 54.5mm |
No. 15 | 17.7mm | 55.5mm |
No. 16 | 18.0mm | 56.5mm |
No. 17 | 18.4mm | 57.6mm |
No. 18 | 18.7mm | 58.6mm |
No. 19 | 19.0mm | 59.7mm |
No. 20 | 19.4mm | 60.7mm |
No. 21 | 19.7mm | 61.8mm |
No. 22 | 20.0mm | 62.8mm |
No. 23 | 20.4mm | 63.9mm |
No. 24 | 20.7mm | 64.9mm |
No. 25 | 21.0mm | 66.0mm |