G-SHOCK sports line "G-SQUAD". Equipped with functions useful for training such as running, such as distance measurement function and smartphone linkage function. Correct the measured distance by linking with the GPS function of the smartphone. Once corrected, the mileage can be measured with the watch alone from the next time. In addition, the auto trap function that measures the running pace and automatically measures the time is also possible. You can also check life logs and activity history with the dedicated app, and automatically create training plans. A high-definition MIP liquid crystal display is used for the display, and a super illuminator is also installed. A soft urethane material is used for the band to improve the fit, and a large number of band holes are provided for fine adjustment. In addition, it achieves a battery life of about 2 years even when using multiple functions on a daily basis. It is useful for a wide range of purposes, from daily health management to strengthening your running endurance.

G-SHOCK has been evolving in pursuit of toughness since its release in 1983. Among them, "DW-5600" which adopted the square case which is the origin of G-SHOCK was equipped with EL backlight.

A new model with a new structure using carbon material has appeared from the Master of G Series "MUDMASTER", which is intended for use on the extreme land where rubble and earth and sand are piled up and scattered. The use of carbon, a highly rigid material for the case, minimizes damage and deformation due to impact, etc., and ensures high airtightness without a metal button pipe. Furthermore, equipped with a filter to prevent intrusion of mud, it has achieved dustproof and mudproof performance that can withstand harsh environments. It is also equipped with a stainless steel panel back that maintains airtightness and a back cover made of glass fiber-containing fine resin that is resistant to impact. In pursuit of practicality and toughness, we adopted a design imitating a gasoline carrying can mounted on an off-road vehicle running on rough roads. The bezel uses a three-layer structure with a carbon fiber sheet inserted into the fine resin. By making the top layer of fine resin transparent, we finished it with a bezel that shows the texture of carbon. On the function side, in addition to a small sensor that can measure direction, altitude / barometric pressure, and temperature, a built-in acceleration sensor that can measure the number of steps makes it a quad sensor. It facilitates understanding of changes in the natural environment and activity history, and supports land missions. In addition to the easy time adjustment in cooperation with the G-SHOCK dedicated application, a "mission log function" is newly installed. The altitude obtained by the watch and the route obtained by the GPS of the smartphone are automatically recorded in the application. Plot the altitude points obtained by manual operation on the trajectory. In addition, the calorie consumption taking into account the elevation element is calculated from the altitude + the number of steps, and recorded as an activity log. In the "location indicator function", if you record the current location on the app by operating the clock button, you can also display the direction to the recording point with the second hand and the distance on the LCD. A new "mode switching / customization function" is also provided. By setting ON / OFF of the mode and display switching on the application, it is possible to customize such as using only necessary functions and changing the display order according to the application. Pursuit of robustness, operability, and wearability that can be used in harsh environments. This is a toughness watch that is equipped with a sensor function and a smartphone link function, and supports quick judgment and accurate actions under various conditions.